Eisco Labs Borosilicate Salt Bridge (Diameter of "U" tubes: Outer: 0.53in/Inner: 0.41in; Diameter of bottom tube: Outer: 0.32in/Inner:0.19in

$20.86
  • Inverted tube in a "U" shape with tightly closed ends
  • Made of sturdy borosilicate glass
  • 6.5 inches in height
  • 4 3/8 inches in width (between the arms of the "U")

The salt bridge is used to connect the oxidation and reduction half-cells of a galvanic cell. It allows ions to flow from one solution to the other without mixing the solutions (thus completing the electrical circuit) and allows the solutions in the two half-cells to remain electrically neutral.
The sintered discs that cap off each side are made of glass with a porosity of G2.
Does not contain liquid or gel.
Eisco Labs Borosilicate glass has the following heat tolerances: Strain Point -515�C | Annealing Point 565�C | Softening Point 820�C.

  • Inverted tube in a "U" shape with tightly closed ends
  • Made of sturdy borosilicate glass
  • 6.5 inches in height
  • 4 3/8 inches in width (between the arms of the "U")

The salt bridge is used to connect the oxidation and reduction half-cells of a galvanic cell. It allows ions to flow from one solution to the other without mixing the solutions (thus completing the electrical circuit) and allows the solutions in the two half-cells to remain electrically neutral.
The sintered discs that cap off each side are made of glass with a porosity of G2.
Does not contain liquid or gel.
Eisco Labs Borosilicate glass has the following heat tolerances: Strain Point -515�C | Annealing Point 565�C | Softening Point 820�C.